Battery charger

[Exc3l]

Looking for new chargers right at 50-70 CAD on Amazon. Does anyone have any experience with the popular B6 chargers? I run XT90's so it would be nice to not have to solder but its fine if not. Looking at this rn.
https://www.amazon.ca/gp/product/B08C592PNV/ref=ox_sc_act_title_2?smid=AR2NVNA2K4WQD&psc=1

 

[GatorBait]

I have the tenergy 6b charger. Nice and quiet since there is no fan. Charges fine. Mine only does 5A so not good for bigger batteries. The beep alerts are a bit annoying and discharge/storage is really slow. Also no resistance check and no % capacity indicator. I use it for my kids 2s batteries. I bought a 200w dual charger for mine

 

[Exc3l]

I have the tenergy 6b charger. Nice and quiet since there is no fan. Charges fine. Mine only does 5A so not good for bigger batteries. The beep alerts are a bit annoying and discharge/storage is really slow. Also no resistance check and no % capacity indicator. I use it for my kids 2s batteries. I bought a 200w dual charger for mine

Does it display cell voltage?

 

[GatorBait]

Voltage per cell yes

 

[Exc3l]

I am charging (2) 3s 50c 5000mAH batteries. I think I am good! Thanks, Gator.

 

[olds97_lss]

Can get one of these and charge them both at the same time if they are near the same voltage:
https://www.ebay.com/itm/Common-Sen...Board-for-Lipos-w-XT90-Connector/192283894831

It will double the time it takes to charge, but at least will do them at the same time. To get something that can charge them at the same time you need 2x5A/60W or 1x10A/120W.

 

[Exc3l]

Can get one of these and charge them both at the same time if they are near the same voltage:
https://www.ebay.com/itm/Common-Sen...Board-for-Lipos-w-XT90-Connector/192283894831

It will double the time it takes to charge, but at least will do them at the same time. To get something that can charge them at the same time you need 2x5A/60W or 1x10A/120W.

Thanks!