Premium members don't see ads. Clickhereto upgrade.

Talion Bent rear dog bone, is the chassis bent as well?

thecyber.ninja

Active Member
Messages
6
Reaction score
3
Arrma RC's
Talion
So new Talion owner here.

While learning to drive, I've bent the rear dogbone of my new Talion on a few small jumps:
36093

While I am waiting on the new dogbone, I took a look at the chassis and am concerned it might be bent:
36094
Thoughts?

Thanks!

Jason
 

BashingBrian

Well-Known Member
ArrmaForum Fan
Messages
673
Reaction score
839
Location
England
Arrma RC's
Granite, Kraton 6s, Senton
Wow..!! that's a big bend, did it break the rear brace too..??
 

thecyber.ninja

Active Member
Messages
6
Reaction score
3
Arrma RC's
Talion
No, because it wasn't attached! I had taken the wing mount off earlier since it had broke too. Being a newb, didn't realize the brace was attached to the wing mount...

off to m2c racing for an upgraded chassis!
 

Sledgehog

Well-Known Member
Messages
825
Reaction score
838
Location
New Hampshire, USA
Arrma RC's
Talion
replacement stock chassis is fine as long as you have decent chassis braces ON the car :D (that's why they are there)
 

slick2500

Will work for beer.
Premium Member
ArrmaForum Fan
Excellence Award
Messages
5,452
Reaction score
3,773
Location
Rapid City, SD
Arrma RC's
Outcast 6s, Typhon 3s
No, because it wasn't attached! I had taken the wing mount off earlier since it had broke too. Being a newb, didn't realize the brace was attached to the wing mount...

off to m2c racing for an upgraded chassis!
Yup you need those braces. If the wing mount broke and you don't want to use it, at the very least you need the brace mount for the Senton. AR320277
 

Bri26

Well-Known Member
Messages
191
Reaction score
59
Arrma RC's
Fury
That's crazy. It looks like the built-in kick up on the front chassis of most RC vehicles. Definitely a good time to upgrade to the M2C chassis.

Brian
 

thecyber.ninja

Active Member
Messages
6
Reaction score
3
Arrma RC's
Talion
Now the wait for the new chassis and dogbone... anything I need to know before the chassis replacement.

I have a rustler (which I think I have replaced damn near every part on, but is a very simple 2wd ;) and a stampede. About the biggest thing I have done is replace a slipper clutch on the stampede...
 

slick2500

Will work for beer.
Premium Member
ArrmaForum Fan
Excellence Award
Messages
5,452
Reaction score
3,773
Location
Rapid City, SD
Arrma RC's
Outcast 6s, Typhon 3s
Order hot racing chassis braces.
 
Premium members don't see ads. Clickhereto upgrade.

Similar threads


Top