Best Shock-Bump Stops-For 6s Rigs

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

djrahbee

Send-Flip-Break-Fix-Repeat 🤙🏼
Premium Member
ArrmaForum Fan
Build Thread Contributor
Messages
3,098
Reaction score
9,358
Location
VA
Arrma RC's
  1. Infraction
  2. Kraton 8S
  3. Kraton 6s
  4. Kraton EXB
  5. Mojave
  6. Outcast 4s
  7. Outcast 8s
  8. Outcast EXB
  9. Infraction 4x4
Sup. I keep pooping out front cvd's. Happens when I'm hitting the ramp. Did it with rpm arms now it's happening with stock arms. I have taken shims out. I have M2C hex extenders on my Kraton, could this be causing issues? Looking for some bump stops that work better than fuel line. Seen it discussed a few times on the forum but don't think I've seen or can remember what people are using. Bump stops or any other solution..✌🏼

https://jconcepts.net/rubber-bump-stops

Axial On HH

Another Axial on HH

AMain

More from HH
 
Last edited:
Thinking about getting these..
Screen Shot 2023-03-17 at 7.54.07 PM.png

Got the wheels turnin now. Got this rubber gasket from ammo cans I keep finding uses for. Used under motor cans to help keep from flexing on landings. Now, I think I might be able to cut small pieces of it, poke holes and stick a couple on my shocks. Worst case it doesn’t work.
ED47A98B-038F-421C-88DE-F9942AFDF2D6.jpeg
22B277EA-2ED5-4559-AA14-21899EF126E3.jpeg
176D1B9F-C43E-48F5-85AD-9C8EAEFEE38B.jpeg
 
Last edited:
Well I think I have a pretty good temporary permanent fix. The rubber gasket worked. Man I don’t know what I would have done without all the feedback from myself. 😂

8B80477E-3C1F-4EE8-B5C6-E9C1DBEA819E.jpeg
157DB334-6B4F-43BE-B383-233B6632A3FF.jpeg
36FDF5CD-4BE9-4FB6-9FC6-69777B4BE070.jpeg


I figured I should mention those sexy lime green shock collars are from none other than @Tex Koder himself.
50A4F0A4-1043-45D9-827E-96E33E2C3C76.jpeg

64206A8C-23C4-4BCA-9D6F-C0B7A55B2F27.jpeg
 
#3 and #4 are the same part. I haven't had a chance to test them yet as the weather has been very uncooperative. I have some of the Axial 1356 iirc never thought of trying them.
 
Was this a factory spec rig, did you change any tower/chassis/shock combination?

Moving the upper shock mount down is essentially what you’re doing by limiting full compression travel and what I do on my custom Mojave builds to get full droop/articulation instead. You can also swap to dogbones to help allow floatation instead of being point fixed.

 
Was this a factory spec rig, did you change any tower/chassis/shock combination?
Not stock, it has CF towers, Viatavon bulkheads, M2C hex extenders...5mm I think. Moving the shocks might help. Haven't tried that yet. I've been away today enjoying the last snowboard trip of the year. Thanks guy! 🤙🏼
 
Well fellas..I am happy to report that I got a full pack in today with ZERO cvd poppage! I believe my solution worked like a charm. I'm not even going to bother wasting any money or time ordering anything. Took a few tumbles that surely would have popped out before. Love putting my rigs back on the shelf unbroken. 🤙🏼😎😁
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top