jnyc10306
Member
- Messages
- 75
- Reaction score
- 69
Hello, I'm new here. Can someone tell me why my 4s motor and esc cap pack gets to hot to touch. I run a 3s lipo with a 15t pinion. How does it have the same heat going from a 20t to a 15t pinion and setting the punch to level2 and setting the throttle to 50. The esc is running cool but not the cap pack. I have brand new motor bearings installed. With the car propped up I can easily turn the center drive shaft with my fingers. Also I run on a concrete track. I run all 3 fans off of its own lipo as seen in pic.
Blx 120 esc
Blx 2400kv motor
15t pinion
HR spur
M2c motor mount
Power HD b3 servo
Power hobby 3s lipo
HR steering rack
Pro line shocks
HR knuckles
Center brace
HR Center brace mounts
T bone bumper
HR ball joints
Integy shock tower guards
Spectrum dx3 remote
Gpm body mounts
Blx 120 esc
Blx 2400kv motor
15t pinion
HR spur
M2c motor mount
Power HD b3 servo
Power hobby 3s lipo
HR steering rack
Pro line shocks
HR knuckles
Center brace
HR Center brace mounts
T bone bumper
HR ball joints
Integy shock tower guards
Spectrum dx3 remote
Gpm body mounts