3d printed mount (PLA, black) designed to easily mount a BLX 185 or Firma 150a ESC to the MEGA and 3s lineup.
$12 shipped to the lower 48.
This mount bolts on top of the existing receiver box. The 6s ESC (BLX 185 or Firma 150a) then bolts to the 3d printed mount. You will need (2) M3 screws. It will turn the ESC 90° either way. You can chose which way you want it facing, but I have found it works best with the motor wires facing out. The tab is to mount the power switch.
Works with the Senton, Granite, Bigrock, and Vorteks. I can't say for sure, but it should work with the Mini Infraction and Vendetta.
This mount will NOT work with the Typhon due to the low body.
If you have any questions, please ask!
Thanks!
$12 shipped to the lower 48.
This mount bolts on top of the existing receiver box. The 6s ESC (BLX 185 or Firma 150a) then bolts to the 3d printed mount. You will need (2) M3 screws. It will turn the ESC 90° either way. You can chose which way you want it facing, but I have found it works best with the motor wires facing out. The tab is to mount the power switch.
Works with the Senton, Granite, Bigrock, and Vorteks. I can't say for sure, but it should work with the Mini Infraction and Vendetta.
This mount will NOT work with the Typhon due to the low body.
If you have any questions, please ask!
Thanks!
Last edited:
