Body options for Team Associated MT10

[Velodromed]

I know this is a shot in the dark but…
My step-daughter wants to take over my MT10 but only if it’s rainbow, so I need a clear body. Does anybody know what options are out there besides the stock body?

Has anybody bought this body? I was looking at it but thinking it might be too narrow. It’s within a half inch of the wheelbase though.

 

[Crunchy Gears]

Long as the wheelbase is the same should be fine. I bought a stampede body recently and other than having to make my own post holes it fits fine on the Granite. All the little 1/10 MTs are basically the same size.

 

[Mikeeeeeeeeeeeeeeeal]

I'm jealous, try finding a lid for 360mm wheelbase..........

 

[slick2500]

Like @Crunchy Gears said the Rival is about the same size as the Granite and Stampede so the bodies for those should fit.

Granite
Wheelbase
11.3" (287 mm)
Front Track
13.46 in (342mm)
Product Length
18.74" (476 mm)

Stampede

Length:		16.25 inches (413 mm)
Front Track:		12.75 inches (324 mm)
Rear Track:		12.75 inches (324 mm)
Weight:		65.3 ounces (1.85 kg)
Height (overall):		9.5 inches (241 mm)
Wheelbase:		10.63 inches (270 mm)

Rival

Length:	507mm (19.96in)
Width:	325mm (12.8in)
Wheelbase:	285mm (11.22in)
Weight:	2850g (6.28lbs)

The length of the Rival and Granite is longer because they include the front bumper and the wheelie bar in the measurements.

 

[Velodromed]

Like @Crunchy Gears said the Rival is about the same size as the Granite and Stampede so the bodies for those should fit.

Granite
Wheelbase
11.3" (287 mm)
Front Track
13.46 in (342mm)
Product Length
18.74" (476 mm)

Stampede

Length:		16.25 inches (413 mm)
Front Track:		12.75 inches (324 mm)
Rear Track:		12.75 inches (324 mm)
Weight:		65.3 ounces (1.85 kg)
Height (overall):		9.5 inches (241 mm)
Wheelbase:		10.63 inches (270 mm)

Rival

Length:	507mm (19.96in)
Width:	325mm (12.8in)
Wheelbase:	285mm (11.22in)
Weight:	2850g (6.28lbs)

The length of the Rival and Granite is longer because they include the front bumper and the wheelie bar in the measurements.

Thanks man, I’d looked up all the numbers and everything before and wanted to see if anybody had actually put something together. That one example that posted temps me because it’s cheap and I like JConcepts shells. I got a feeling it’s too narrow though.

 

[slick2500]

Thanks man, I’d looked up all the numbers and everything before and wanted to see if anybody had actually put something together. That one example that posted temps me because it’s cheap and I like JConcepts shells. I got a feeling it’s too narrow though.

It says it fits the Stampede 4x4 and that is about as wide as the Mt10.