Bought a Saga Pinion for limitless - doesn't work

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

cobalt172

Member
Messages
374
Reaction score
161
Arrma RC's
  1. Kraton 6s
Hey guys, I bought a slightly bigger spur gear for my limitless from SAGA custom RC. I bought a 46 tooth mod 1 pinion gear as I took the advice from some people on this forum. But this does not work because there is not a hole on the opposite side of the pinion which does not let the pin go all the way through it?

Am I high and doing something wrong or does this really not work with the limitless Spool?
 
The limitless spool shaft should have a flat spot on it. You would install this Pinion's grub screw there to hold it.

1602790395538.png
 
ok got it so just use a grub screw on that flat part instead of a shaft going through it. Thank you!
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top