Kraton Brand New! Any suggestions for general use.

[TonyRomano]

I have run this monster two times! Absolutely love this truck, fast, stable.

4 shims enclosed will quite down differentials I assume 2 on each tighten up gears.

Is there anything else I should check or do before some general bashing? Basically flat where I live so no big jumping other than local skate park.

This truck is for playing only, no speed runs, drag racing etc.

Other Arrma monsters for that!

 

[MMoelmann]

I would check to make sure all of the screws are tight on the bottom of the chassis and around the truck. They tend to come loose right out of the box after a few runs. Other than that just replace/upgrade as you break things.

 

[jkflow]

Droop screws

 

[Jluther@becoinc]

Put shims only on the side of the diff on the left side. The shims are to push your gears tighter together. Shims on the right will push gears apart.
They give you a few to make up for the slight differences in their parts manufacturing.

 

[BO55_Saint]

Check all the diff oil levels. My 6s BLX came with 2 empty diffs

 

[djrahbee]

I suggest all the above then...send that sucka!

 

[TonyRomano]

Cool. Thanks.

I have noticed diffs generally need attention across all makes.