Darren Wes
Active Member
Hi guys, has anybody used this brand before:
http://www.ebay.com.au/itm/GoolRC-S...814159?hash=item211555050f:g:6tgAAOSwMtxXqpRU
Yes, I wouldn't recommend their escs but their motors last about a year and a half for 30 bucks, pretty good deal. Just watch out because sometimes their motor wires don't come tinned and only bare copper makes resoldering a pain. You can solder the copper just takes a steady hand and a couple more minutes. Also the windings aren't as tight as castle so it won't be as torquey but it will goes as fast as the 3800kv.
I had a lot of fun with a gool rc 2200kv 3674size rated for 21v(5s) running a 4s lipo on 120a esc and geared it all the way up. Never gets warm.
Also used a 3800kv 3656size rated for 12ish volts on 14.4(4s) with 120a esc....it supercharged the ride...motor got real hot real quick....but it was fun...if I were ever in a race for "pinks" and I had a cheap gool around I would overpower it with one r two more volts than rated for...