Kraton Cant program controller

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Ky2

Active Member
Messages
84
Reaction score
18
Location
Union nj
Arrma RC's
Newbie alert.... lol... when trying to bind the it wont go into reverse... need help asap... the weather is nice in jersey....
 
Why are you trying to bind? Should have been bound from the factory if your using the Tx it came with.

Also if your trying to go backwards AFTER going forwards and braking, you need to go full brakes first and then neutral and then it will move backwards when moving the trigger to reverse.
 
Why are you trying to bind? Should have been bound from the factory if your using the Tx it came with.

Also if your trying to go backwards AFTER going forwards and braking, you need to go full brakes first and then neutral and then it will move backwards when moving the trigger to reverse.
Pushing the trigger up/forward it goes forward.. when pulling the trigger nothing happens
 
Page 23 in manual...all of your settings match? Unless you use your throttle opposite/ reversed. Only other thing is check throttle trim, but make sure you have the car off the ground when setting it.
 
Last edited:
Page 23 in manual...all of your settings match? Unless you use your throttle opposite/ reversed. Only other thing is check throttle trim, but make sure you have the car off the ground when setting it.
Okay thanks my controller settings was way off
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top