Typhon Castle 2200

[Kingleo619]

Just picked up a 20t mod 1 pinion and 50t spur if I was to use that on castle 2200 motor for speed runs, is it ok to leave that setup in for bashing also or swap out and put 14t back in

 

[RobinHood10]

20t with 2200kv is too much for bashing. what is your voltage?

 

[Kingleo619]

20t with 2200kv is too much for bashing. what is your voltage?

2 3s 5000 50c venom battery’s 5amp charge12.6
Stock esc, stock diff fluids
Is that what you mean
I’m not up to par on voyage #s

 

[Kingleo619]

20t with 2200kv is too much for bashing. what is your voltage?

What’s a good pinion for bashing

 

[LibertyMKiii]

I have looked into this some since I have a 2200kv sitting on the shelf in the garage. The general info I have gathered is that running something in the 12t to 13t range is best for general bashing use. 15-20T for speed should be plenty fast for 98% of people. (takes some practice to run over 80mph)

 

[GMballistic]

@Kingleo619 you basically asked the same question more or less the other day didn't you?
Link: https://www.arrmaforum.com/threads/bashing.11892/#post-138640