Kraton Castle monster 1515y motor overheating?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Kratonage

Active Member
Messages
127
Reaction score
65
Location
Vegas, NV
Arrma RC's
  1. Talion
Running 2x 2s 5000mah 40c and 14t pinion on my kraton with my mamba x combo 2200kv and motor temps at 162 Fahrenheit peak. Anyone know if that is normal? Ambient temp is about 78 degrees. :confused:
 
162 should be fine if your breaking into the 175+ range then your in the warning/danger area depending on the motor and anything over 200 you need to re-think your gearing or check and see if something is binding somewhere.
 
162 should be fine if your breaking into the 175+ range then your in the warning/danger area depending on the motor and anything over 200 you need to re-think your gearing or check and see if something is binding somewhere.


Cool thanks for that info kzayne :cool:
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top