Talion Center diff case

Capt_Ron

Well-Known Member
Messages
44
Reaction score
12
Arrma RC's
  1. Talion
Filled my center diff with 100k and 2 runs later the case melted allowing the spider gears to move out any idea why this would happen.
The good news is it looks like the case is the only thing broken.
 

bogdaddyd82

Well-Known Member
Messages
80
Reaction score
32
Location
Massachusetts
Arrma RC's
  1. Granite
Filled my center diff with 100k and 2 runs later the case melted allowing the spider gears to move out any idea why this would happen.
The good news is it looks like the case is the only thing broken.


Sounds like you could have had a bearing failure. Or the diff may have been improperly shimmed. Either of which can cause extreme heat. Were you running 6s?
 

Capt_Ron

Well-Known Member
Messages
44
Reaction score
12
Arrma RC's
  1. Talion
I didn't get any pictures and had to cut the case apart to get the spiders out.
There was no bearing problems I just put in new ones when I put the diff in. And all the shims we're in were they belonged. I did one run on 4s and then it did go out on 6s.
By the way I have a MMX and 2200kv in it.
 
Top