Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I’m not referring to the max cut out. I’m talking about the amps for example if my battery is 5300mah I set the charger to 5.3 amps.It will stop charging once you reach 7000mAh if your Lipo was run low'ish but restarting it will take it up to your 8000mAh.
No reason why there should be any other issue.
I’m not referring to the max cut out. I’m talking about the amps for example if my battery is 5300mah I set the charger to 5.3 amps.
No, swelling is usually caused by charging at too high of a C rate or running the battery too low. Charging at 1C or below should be fine.So it won’t make the battery swell? When I first got into the hobby I bought an onyx 6400 mah battery and was charging it at 5.0amps and the battery did swell but I do t know if it was from that
So it won’t make the battery swell? When I first got into the hobby I bought an onyx 6400 mah battery and was charging it at 5.0amps and the battery did swell but I do t know if it was from that
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!