Infraction Chassis brace for Infraction 3s?

[morrjr71]

Is there a tower-to-tower chassis brace available for the Infraction 3s BLX? If so, please provide a link.

Does one made for the Vendetta fit?

 

[Velodromed]

Is there a tower-to-tower chassis brace available for the Infraction 3s BLX? If so, please provide a link.

Does one made for the Vendetta fit?

It should, same chassis and towers. I made my own from a $1.99 notorious brace off Jenny’s.

 

[morrjr71]

It should, same chassis and towers. I made my own from a $1.99 notorious brace off Jenny’s.

Did you have to modify it to fit?

 

[Cereal_killer]

Something like this?

Only other thing I've seen.

 

[Velodromed]

Yup. It was an inch short so I added about an inch of spacers. I already had this parts kit (ARA320528) so used all except the shock tower mount parts since the towers already had them integrated. Unfortunately it seems backordered everywhere.

On my vorteks I simply cut a 1/8x1/2” bar down to size then drilled holes at each end and it’s worked very well for over a year now. Would have done the same with my infraction but I already had the other parts lying around. Here’s a bar that should work.
STEELWORKS (BOLTMASTER) 11285 Flat Aluminium Bar, 1/8 x 1/2 x 36", 10-Assorted https://a.co/d/hxPplGi

 

[morrjr71]

Something like this?

View attachment 235298

View attachment 235299
Only other thing I've seen.

View attachment 235301

Thanks. I saw those on Ebay, and the one in the top pic is exactly what I am looking for.

 

[Velodromed]

Something like this?

View attachment 235298

View attachment 235299
Only other thing I've seen.

View attachment 235301

That cf brace looks sweet! Maybe when funds allow down the line lol…

 

[rjinaz]

I made one from a full size Infraction center brace. Overkill, but works great.
https://www.arrmaforum.com/threads/my-first-official-rc-build-vendetta-mods.47816/post-676524

 

[crunchtime]

Why is a center brace needed on the Infraction 3s or Vendetta, since these aren't off road bashers? Is it needed during a normal run, or is it more for when you lose control and crash?

 

[morrjr71]

Why is a center brace needed on the Infraction 3s or Vendetta, since these aren't off road bashers? Is it needed during a normal run, or is it more for when you lose control and crash?

It's not needed, but it can help if there is a frontend crash at higher speeds.

 

[six7jedi]

Is there a tower-to-tower chassis brace available for the Infraction 3s BLX? If so, please provide a link.

Does one made for the Vendetta fit?

I have a carbon fiber one, if youre still looking.

 

[morrjr71]

I have a carbon fiber one, if youre still looking.

I found a carbon fiber brace and I have it installed.