Hey all,
Im 39 yrs old and I entered the hobby on Jan.2020.
After reading for 2 months i found her
My first rig (Mojave v1)
I would to send a huge thanks to @Aussie RC Playground and @RC DUDE81.
With those you tubers i made my decision- Arrma. The Mojave.
After lots of digging and reading i could start to picture in my mind the project.
...And the picture goT larger and larger as i kept reading- the rabbit hole is DEEP !
I have decided that i would not run it untill its done ! (OCD..)
You know.. its not RTR... its AlmostRTR.
The bearings, heat issues, diffs, remote, mud...All of those had to be adressed.
So first i grabbed a second hand remote:
DX5C with SR6100t receiver
** i would be happy to hear from you if its a good receiver... ????
Now for the sweets-
I just went each month and slowlly started buying every BEST upgrade there is.... Scorched Parts, M2C, PPS, NTF, Vitavon, HWmax6 1650kv, Promodeler servo...
Here are most of the things.
I will update slowlly as i go...
Ive installed already the Tower to Tower Carbon Fiber Brace + Titanium Steering Stab plates and the Ackerman Arm from Scorched Parts.
Here are the sweets
All Scorched Parts arsenal for the Mojave
Titanium Chassis
Titanium Shock Towers
Titanium Pillow Balls ( almost hard as like Eric81 balls...lol..)
Scorched Parts:
Titanium Top Steering Plate
Titanium Turnbucklrs
Mojave Stainless steel Bolts kit
Mojave Titanium Bolts kit
Carbon Fibre Battery Saver
Mojave front and rear Fenders
M2C:
PPS motor and diff mount..
These is Epic gear..
WOW !!!!!!!
Vitavons Hubs+Balkheads+ Rims
Promodeler DS930BLHV servo
HW Max6 + HW 4985 1650KV
I got it for 18$ at Arrma Maniacs raffle.
NTF fans will be attached for those.
I live in a hot climat
Rebuild my diffs with:
20k front 500k center 60 rear
Arrma Aluminium diff case.
Tekjo gaskets
Mugen shims
Mcmaster input gear pin
Jims bearings all the rig.
*Will be updated soon*
Im 39 yrs old and I entered the hobby on Jan.2020.
After reading for 2 months i found her
My first rig (Mojave v1)
I would to send a huge thanks to @Aussie RC Playground and @RC DUDE81.
With those you tubers i made my decision- Arrma. The Mojave.
After lots of digging and reading i could start to picture in my mind the project.
...And the picture goT larger and larger as i kept reading- the rabbit hole is DEEP !
I have decided that i would not run it untill its done ! (OCD..)
You know.. its not RTR... its AlmostRTR.
The bearings, heat issues, diffs, remote, mud...All of those had to be adressed.
So first i grabbed a second hand remote:
DX5C with SR6100t receiver
** i would be happy to hear from you if its a good receiver... ????
Now for the sweets-
I just went each month and slowlly started buying every BEST upgrade there is.... Scorched Parts, M2C, PPS, NTF, Vitavon, HWmax6 1650kv, Promodeler servo...
Here are most of the things.
I will update slowlly as i go...
Ive installed already the Tower to Tower Carbon Fiber Brace + Titanium Steering Stab plates and the Ackerman Arm from Scorched Parts.
Here are the sweets
All Scorched Parts arsenal for the Mojave
Titanium Chassis
Titanium Shock Towers
Titanium Pillow Balls ( almost hard as like Eric81 balls...lol..)
Scorched Parts:
Titanium Top Steering Plate
Titanium Turnbucklrs
Mojave Stainless steel Bolts kit
Mojave Titanium Bolts kit
Carbon Fibre Battery Saver
Mojave front and rear Fenders
M2C:
PPS motor and diff mount..
These is Epic gear..
WOW !!!!!!!
Vitavons Hubs+Balkheads+ Rims
Promodeler DS930BLHV servo
HW Max6 + HW 4985 1650KV
I got it for 18$ at Arrma Maniacs raffle.
NTF fans will be attached for those.
I live in a hot climat
Rebuild my diffs with:
20k front 500k center 60 rear
Arrma Aluminium diff case.
Tekjo gaskets
Mugen shims
Mcmaster input gear pin
Jims bearings all the rig.
*Will be updated soon*
Last edited: