Corally 1/10th 6s WIP

[Megasty]

I never really liked working on multiple projects at once but I can't sit on ideas anymore & risk losing them forever. I had a few V1 Corallys sitting around collecting dust & a perfect good Arrma Siren getting more & more beef. So with no correlation whatsoever, I tried to shrink the Dementor chassis, Siren style, but it wouldn't work. The chassis had too many holes in the front. So I tried cutting the rear & it worked great. I used an Arrma 6s front center driveshaft in the rear & left the front the same. I also used an Arrma battery tray (since it's like the best battery tray ever ) Mojave arms & a ridiculous amount of center bracing gives me a decent mock up. I don't know if I will keep the ESC in the tower but it looks dumb enough to work. So far, it's no where hear as heavy as the Siren but a few more add-ons will get it up there too.

 

[Megasty]

It's done for now & it's very wide with the Kaiju tires. I also had to do some mix & match to get the rear hubs right. While it's no where near as beefy as the Siren, it should definitely hold it's own. Now all I have to do is get another Corally system for it, since I don't know if that blx185 still works. At just about 11lbs, it's hefty for a 1/10th but it needs the weight if it's going to have any hope of laying that power down. It's 17'5" wide with the Kaiju tires & large hubs, so that 35kg servo will have some work to do. But it should be more than wide enough to be extra stable.

 

[Megasty]

I finally got to run it a bit.

I have an unused system from my Cen Reeper I want to try out in it next. The motor is only 1450kv so I'll throw in the largest pinion I can & give it a go.