Limitless Custom Lambo JOTA Side Mirrors - Tex Koder

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Tex Koder

2D , 3D Not a problem. I'll take that Challenge.
Lifetime Premium!
Premium Member
ArrmaForum Fan
Excellence Award
Hospitality Award
Build Thread Contributor
Messages
9,675
Reaction score
24,024
Location
Dallas, TX (USA)
Arrma RC's
  1. Granite
  2. Infraction
  3. Kraton 6s
  4. Mojave
  5. Nero
  6. Senton 3s
  7. Typhon 6s
  8. Vendetta
Some custom side mirrors to complete the scale look of the fabulous Bittydesign Lamborghini JOTA body.

Current Status: Actual 1/7 scale mountable Props , please see Post#7


1660601306456.png

1660601090318.png


1660601198165.png


1660601399437.png


Designed in 3mm mounting holes to secure them to the body.
[28mm deep, enough to go completely thru the shaft and partially into the mirror housing.]
 
Last edited:
Unfortunately I don't have any chrome vinyl..

But I do have some 3M aluminum A/C duct tape.
IMG_20220817_111059042.jpg


IMG_20220817_111021719.jpg


IMG_20220817_111039374.jpg


IMG_20220817_111048001.jpg



A bit of Blue painter's tape to "smooth out" the rough surface.. before applying the silver tape.
IMG_20220817_111432885.jpg


IMG_20220817_111511727_HDR.jpg


IMG_20220817_112249531_HDR.jpg
 
.
Scaled 1/7 Lamborghini Aventador SVJ JOTA Custom Side Mirrors "mounted"

IMG_20220817_114659080.jpg

(Mirrors held on with 3M double-sided tape & trimmed flush. Just temporary - for this photoshoot.)

IMG_20220817_114654267.jpg


IMG_20220817_114819500_HDR.jpg

(Yes, the body's Front lower edge needs to be trimmed more ,so it can sit lower to the ground And have Less wheel gap.)

IMG_20220817_114823788_HDR.jpg


IMG_20220817_114832264-B.jpg



NOTE-
This is LibertyMKiii's Lambo. He gave me the keys to it ,so it's stashed at my garage/driveway for the next few days..
(I did Not GTA-V his ride. Nor did I drill into the body to secure the mirrors.)
 
Looks like it completes the scale look of the car.

I had always thought it would be cool to design a 3d printed grill for RC car bodies. In the case of this Lambo maybe the rear grill that meets up around the tail lights. The front bumper grill is quite unique on this scar where it is one large surface more or less.
 
Looks like it completes the scale look of the car.

Thank you sir.
I'm definitely wanting to give these cool Bittydesign bodies a more accurate appearance.

I had always thought it would be cool to design a 3d printed grill for RC car bodies. In the case of this Lambo maybe the rear grill that meets up around the tail lights. The front bumper grill is quite unique on this scar where it is one large surface more or less.

Well, if there is enough interest and given some more time.. I may tackle that challenge and create those grills.
Considering I've already created the Splitter &Winglets, Side Mirrors, (and rough draft of the rear Wing) ;)
 
Thank you sir.
I'm definitely wanting to give these cool Bittydesign bodies a more accurate appearance.



Well, if there is enough interest and given some more time.. I may tackle that challenge and create those grills.
Considering I've already created the Splitter &Winglets, Side Mirrors, (and rough draft of the rear Wing) ;)
I would think it may be better $$$ to make a product like that for the felony or infraction first.
 
I would think it may be better $$$ to make a product like that for the felony or infraction first.

Yes, yes.. I'm on it Boss.
I can only work so fast you know.
 
^^^^

You might want to delete that , Pronto!
That's out in the public domain!!
 
Last edited:
Back
Top