Did i discover the ultimate high voltage connecter

[K-BASH]

I've been a foam technician for 9years(drive,maintain, matenence,prep,spray foam insulation an spray rig.today I had a problem with hose heat..300 feet of hose that's heated to 130-140degrees to make foam.hi-pressure,hi- temperature system..hose is in 50ft sections an has 6 Aug wire running from machine to spray gun an back to machine..a big loop.anyway.i tore apart hose till I found break in wire..had happened many times over the years.grabbed some connectors an fixing....
How would these work on high-volt speedruns????know a little about electric,I know it'll hurt ya without ya seeing it coming...still researching them..anyone a Electrician or knows if these would be worth giving a try on my high voltage car.

 

[K-BASH]

These can't desoder an fall apart.
8 aug castle wire

 

[jondilly1974]

Not sure what’s to gain? Weight?

 

[K-BASH]

Not sure what’s to gain? Weight?

Max flow,but most importantly to me is no desodering.ill add some weight for no more 135+ desodered runs ,crashs cause 1 of 3 motor leads desoder an then no brakes....started pulling over 420 amps an it happens more.gos 8mm outa xlx2 ta 7mm xt150s.an there's the bottleneck, restricted at 7mm,then equals heat.then crash

 

[jondilly1974]

Max flow,but most importantly to me is no desodering.ill add some weight for no more 135+ desodered runs ,crashs cause 1 of 3 motor leads desoder an then no brakes....started pulling over 420 amps an it happens more.gos 8mm outa xlx2 ta 7mm xt150s.an there's the bottleneck, restricted at 7mm,then equals heat.then crash

I think you’d be better off with crimp connectors instead of a wire block.

10 pcs 8 AWG 8 Gauge Butt Splice Connector Pure Copper Tin Coated Marine Grade Uninsulated - by WindyNation https://www.amazon.com/dp/B07WTS27QP/ref=cm_sw_r_cp_api_glt_fabc_KMR7NA4D48N056JMEQ4R

 

[K-BASH]

Whaaaat,,,jd you da man..

 

[jondilly1974]

Whaaaat,,,jd you da man..

Just an FYI, you CAN actually crimp THEN solder these. Best of both worlds.