Diff Gear Main 43T Spiral

[RubberDown]

Have some damage to some teeth in the front differential on my Kraton 6S.
Instead of buying the whole assembly I purchased the Diff Gear Main 43T Spiral and wondering how to transfer the gear, bearing and cup to new gear?

 

[RCbuzz]

Hey @RubberDown gently pull up on the sun gear (small gear) and all will be revealed .

It is not attached, probably just stuck on there by the diff fluid.

 

[RubberDown]

Duh
I just figured that out after taking a closer look.
I slid a blade under the gear while slowly turning it and it popped right off.
Thanks for reply!!!!!

 

[hobo]

Duh
I just figured that out after taking a closer look.
I slid a blade under the gear while slowly turning it and it popped right off.
Thanks for reply!!!!!View attachment 387462

while your in there I would change your pins for the m2c one's they have a tendency to break.

 

[Dan B.]

And don’t forget that spiral cut gears aren’t compatible with straight cut units, make sure you get the pinion input gear as well.

 

[slick2500]

And don’t forget that spiral cut gears aren’t compatible with straight cut units, make sure you get the pinion input gear as well.

Was just gonna say the same thing, the crown and pinion gears should always be replaced as pairs.