Senton Diff shim parts??

[Adam6s]

In the V3 Senton 6s is it necessary to do the diff shim upgrade and what exact parts or part numbers do I need to do the job. I thought I read something about Thundertiger??Thank you in advance for any help..

 

[WoodiE]

@Adam6s nearly every differential from most any RC manufacture can benefit from shimming. All this does is remove the little bit (or sometimes a lot) of extra slop in the diffs.

Check out our thread How to shim your Arrma diff, which details not only how to do it but also what shims will work.

 

[jonnyCAT74]

I rebuilt mine with mugen diff washers and upgraded the outdrives as well to mugen

https://www.ebay.com/itm/MUGE0206-M...065525&hash=item5d639bb864:g:6JYAAOSwFdtX1N2Y


https://www.ebay.com/itm/MUGE0228-M...873415&hash=item1c64c9b401:g:6GgAAOSwdIFX1OfG


these are all drop in.............the outdrives on the center diff take a little modification , so I would not mess with them

the steel that the arrma outdrives are not as hard and will get sloppy after 5-6 months

 

[nulli]

Nice to know. How long have you driven the Mugen outdrives?

 

[jonnyCAT74]

Nice to know. How long have you driven the Mugen outdrives?

at least 20 runs

 

[nulli]

Any noticeable difference yet?

 

[jonnyCAT74]

its 1000x better , smoother , no slop.............I did the center diff as well but thats more complicated , requires some additional mod

 

[Adam6s]

Nice!

 

[nulli]

its 1000x better , smoother , no slop.............I did the center diff as well but thats more complicated , requires some additional mod

What sort of modification is required?