Differential lock question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
I don't understand the 550 thing
550 is the motor size.
32927



And I meant 540 not 550.

But does your motor look like this
32928



Or like this
32929



If it looks like the bottom one that is a 540F motor, it is actually a 380 sized motor with fins making it look like a 540 sized motor. 380 motors are like what you find in the 1/16 and smaller cars.
 

Attachments

  • 1552883197411282250125504841594.jpg
    1552883197411282250125504841594.jpg
    330.7 KB · Views: 46
Yeah that is a 540F motor. They work good for 2wd buggies like the Arrma Raider( standard not XL) Traxxas Bandit, Team Assiciated RC10 ect. That motor is nowhere near being big enough for a 4wd monster truck unfortunately. ?
 
Yeah that is a 540F motor. They work good for 2wd buggies like the Arrma Raider( standard not XL) Traxxas Bandit, Team Assiciated RC10 ect. That motor is nowhere near being big enough for a 4wd monster truck unfortunately. ?
So I'm gonna burn the esc up again?
 
Yeah that is a 540F motor. They work good for 2wd buggies like the Arrma Raider( standard not XL) Traxxas Bandit, Team Assiciated RC10 ect. That motor is nowhere near being big enough for a 4wd monster truck unfortunately. ?
Would a 3000 f540 work well. It will take the top end down alot?
 
So I'm gonna burn the esc up again?
Yup and probably the motor too.
Would a 3000 f540 work well. It will take the top end down alot?
No you do not want a F540 motor at all those are 380 sized motors ie motors for 1/18 cars with fins on them to make them the same size as a 540 motor. You want a 550 sized motor at the very least. But I would go 3660 sized.
 
Yes, if you take the vileneon system and put it in the Blackout and use the same pinion gear in the Blackout that was already in there it is going to be slower, and if you put the goolrc system in the Raider with the pinion that you have in the Raider the Raider is going to be faster. You need to regear both if you want to retain the speeds that both cars had before.
Idk what pitch gears the Blackout uses so I do not know if you can just swap everything straight out. And the Raider depending on which model you started with can be 48p or 32p gears.
 
Yes, if you take the vileneon system and put it in the Blackout and use the same pinion gear in the Blackout that was already in there it is going to be slower, and if you put the goolrc system in the Raider with the pinion that you have in the Raider the Raider is going to be faster. You need to regear both if you want to retain the speeds that both cars had before.
Idk what pitch gears the Blackout uses so I do not know if you can just swap everything straight out. And the Raider depending on which model you started with can be 48p or 32p gears.
.8 mod gears on blackout stock I think Like Arrma BLX
 
This is a good setup?
 

Attachments

  • Screenshot_20190318-074325_Chrome.jpg
    Screenshot_20190318-074325_Chrome.jpg
    193.8 KB · Views: 53
That is the most ghetto unbranded item I have ever seen LOL but it might work
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top