Talion Do you think i can do dual shocks on my v3 Talion like Trach13News
- Thread starter HUGO .R
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
Mr.Duke
Moderator
Community Leader
Premium Member
ArrmaForum Fan
Excellence Award
Build Thread Contributor
- Messages
- 4,223
- Reaction score
- 15,773
- Location
- NC
- Arrma RC's
- Infraction
- Limitless
- Kraton 6s
- Notorious
- Outcast 6s
- Talion
- Typhon 6s
Only if you plan on increasing vehicle weight considerably.
Previous to the release of v3 shocks one of the complaints were that the v1 & v2 shocks didn't offer enough preload and/or spring rate (especially in the rear) which lead to people swapping out the springs for stiffer Teknos or getting really creative (video above) with adding supplemental preload and spring rate to the suspension to make up for the softness of the stock springs. With the stiffer v3 shocks that seemed to fix the issue so I can't see why it would be beneficial to add additional stiffness to the suspension when running close to stock weight
Previous to the release of v3 shocks one of the complaints were that the v1 & v2 shocks didn't offer enough preload and/or spring rate (especially in the rear) which lead to people swapping out the springs for stiffer Teknos or getting really creative (video above) with adding supplemental preload and spring rate to the suspension to make up for the softness of the stock springs. With the stiffer v3 shocks that seemed to fix the issue so I can't see why it would be beneficial to add additional stiffness to the suspension when running close to stock weight
