Infraction Drag set up mods

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Well this has been a fun read. Here’s some real world info
Car runs 114mph on 8s and 98mph on 6s

limitless with tp 5650 1440kv in stock location on 1/5 motor mount
Mamba 8s and ripple killer 8s cap pack
Geared overdrive 36pinion/34spool spur
Only tested on rubber tires

here’s the first 2 passes

first pass was on 4s and hit 2.700 @ 54mph
Second pass on 6s with way more wheel spin and hit 2.750 @ 60mph

my gearing seems explosive down low. Any smaller pinion will just result in more wheelspin.

View attachment 147568View attachment 147567
View attachment 147569View attachment 147570View attachment 147571View attachment 147572View attachment 147573
You are geared way to high for 132ft. I'm running 28p46spur, running 2.1 @ 70-71mph pulling just over 3gs
8s 1250kv
Speed in the 132ft is a fine line between dead hooking and wheel speed while still pulling. These were three differrent passes
1st pass was hottest asphalt temp.. and asphalt temp got cooler as the evening went..
 

Attachments

  • Screenshot_20210923-183926_GNSS PA.jpg
    Screenshot_20210923-183926_GNSS PA.jpg
    91.8 KB · Views: 99
  • Screenshot_20210923-185447_GNSS PA.jpg
    Screenshot_20210923-185447_GNSS PA.jpg
    93.4 KB · Views: 102
  • Screenshot_20210923-195939_GNSS PA.jpg
    Screenshot_20210923-195939_GNSS PA.jpg
    91 KB · Views: 105
Last edited:
2.11 looks good. I have a infraction converted to a limitless body with a kraton 8s , experimenting with gearing I think 32/46 now. With foams I got this

GNSS PA_2021-12-19-12-19-20.jpg
 
34 Spur/ 30 Pinion ratio is good for speed runs, but not in 132ft drag racing. You'll run out of track before your motor peaks.
+1

>> Lim spool spur is also available in a 39T or 29T. Option parts. U may need to have these on hand also, to get it dialed for max trap speeds within 132ft distance.
Stock Lim comes with 34T FWIW. It may limit your gearing options. Saga Customs may have what you need for better gearing options. Larger Spur. Think 42T.

Wheelie bar is paramount for Drag running.
 
Great info. Looking at putting together an infraction for drag on 8s. Looking at TP and mamba X. Not sure what motor to get. Also looking at changing the ring/ pinion. Suggestions
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top