Dx5c rugged sub trim problem

[Kraton punisher]

I got a new Spektrum DX5C transmitter because I have so many vehicles decided time to upgrade. Anyways I watched some videos on trim vs sub trim and I understand that. But the problem I’m having is I have to set my sub trim all the way to 80% , and then from there my wheels are somewhat strait to where the regular trim can fine tune. So as I understand this is a adjustment on the servo horn itself to correct this so I don’t have to sub trim it so far ?? Thanks

 

[X]

Remove your servo horn, turn on electronics and let the servo center itself, then re-install the horn. That should get rid of alot of the need for adjustment. Unless your servo horn or gear on the servo are stripped and cause the teeth to slip.

 

[Kraton punisher]

Ok will do thanks a lot

 

[bicketybam]

Ok will do thanks a lot

Set the sub trim back to 0 and the trim to 0 before you reset the horn.

 

[X]

Set the sub trim back to 0 and the trim to 0 before you reset the horn.

Very good point, I forgot to include that above.