Kraton Edough's RC Kraton 6s BLX build

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
New Red body all painted up with decals and roof skids I won courtesy of @Camaroboy383. Not my favorite color but sure I'll get used to it, looks pretty bad a$$ after decals and skids though😍
IMG_20210114_100427263.jpg

IMG_20210114_100554285.jpg

IMG_20210114_100407988.jpg

IMG_20210114_100525144.jpg
 
Got the front M2C chassis brace today and got it installed. All set for big sends with the M2C chassis and chassis braces💪
IMG_20210423_171621337.jpg
IMG_20210423_171630653.jpg

Now just need a couple front cvd driveshafts, front turnbuckle and 23t servo horn so I can send it again😔 was supposed to get some from @Lovestricken but ...................................🤣
 
Got the front M2C chassis brace today and got it installed. All set for big sends with the M2C chassis and chassis braces💪View attachment 141509View attachment 141512
Now just need a couple front cvd driveshafts, front turnbuckle and 23t servo horn so I can send it again😔 was supposed to get some from @Lovestricken but ...................................🤣

You have at least $210 in M2C parts and you're still sticking with the stock servo? If you need a horn I have one.
 
You have at least $210 in M2C parts and you're still sticking with the stock servo? If you need a horn I have one.
🤣 Ya you can see where my priorities are. I've never had issues with the servo but have one snapped stock chassis and one bent up in the front and down in the rear🤣 ya I need one but I'm thinking of just ordering the whole steering assembly from jenny's as I need a front turnbuckle also as I haven't heard from @Lovestricken in a couple weeks about the ones he was going to send😂
 
🤣 Ya you can see where my priorities are. I've never had issues with the servo but have one snapped stock chassis and one bent up in the front and down in the rear🤣 ya I need one but I'm thinking of just ordering the whole steering assembly from jenny's as I need a front turnbuckle also as I haven't heard from @Lovestricken in a couple weeks about the ones he was going to send😂
Did I forget something???? Lol if I did... oops😂
 
Been slacking on updating the build so here's some catching up... Voltage towers, GPM blue hinge pin blocks all around, Hobbystar 4585 1580kv motor, Amazon 25kg servo, Integy gearboxes front and rear, Exotek wing buttons, EXB chassis brace spindles, JBI rear wing support, @Lovestricken wing mount, RPM rear skid plate and EXB basher front bumper. Rig is quite the beefy machine I've always wanted 💪 and definitely holds up to some big 30+ft sends🤘
IMG_20210610_161503249.jpg
IMG_20210610_190323295.jpg
IMG_20210610_202017991.jpg
IMG_20210610_213951653.jpg
 
Long overdue update... white 3D-RC wing mount and blue bumper support added. New blue RPM arms in the rear and 17t pinion on the Hobbystar 4585 1580kv. Absolutely love my beast red, white and blue K6s😍 Tires will probably be the next change as these copperheads have been on it since September 2020 lol.
20220302_160527.jpg
20220302_164848.jpg
20220302_165953.jpg
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top