SaltyLocal
Active Member
- Messages
- 331
- Reaction score
- 176
I replaced my sons Big Rock servo from the bad stock Spektrum S651 to a new 6s Kraton S652 servo. I set the endpoints and the right seem OK, but the left isn’t turning much and the servo is whining, even when calibration is backed off to only about half travel.
Setting endpoints:
Failed left turn while right seems ok - servo seems to strain either way. Any ideas?
I also physically turned the front wheels left and right and the right definitely turns farther. The left only moves half way or so and seems something is blocking further movement. I did replace the bellcrank with a hot racing part and added their servo saver. I’m lost on what is blocking the full left movement.
Setting endpoints:
Failed left turn while right seems ok - servo seems to strain either way. Any ideas?
I also physically turned the front wheels left and right and the right definitely turns farther. The left only moves half way or so and seems something is blocking further movement. I did replace the bellcrank with a hot racing part and added their servo saver. I’m lost on what is blocking the full left movement.
Last edited: