esc motor combo upgrade

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

ARRMAgeddon

Active Member
Messages
933
Reaction score
413
Location
808 state
Castle Creations 1/8 Mamba Monster 2/Neu-Castle 2200kV

Would this esc motor combo good for the arrma talion?
As an upgrade
 
The only problem I can foresee with that combo is that the bec is known to be a little weak on the MM2, and I believe factory setting is 5.5v. Just something to consider
 
Ok before ordering my electronics
I want to make sure
Max8combo_EZ4274SL_large-1.jpg


This electronics combo
Perfect dropped in on the talion right?
No modifications of any kind?
Is there anything else i should get with this combo?
 
That will work in the Talion just fine, i also know Mamba Monster 2 ESC and their 2200kv motors work well, HPI's ESC and Motor for the Vorza Flux work fine as well (they are rebranded Mamba Monster 2's)
 
Okay not sure if I should start a new thread or just ask here because I don't want to take over someone else's thread but what would be the main reason for doing a motor and escape upgrade. Is it for more power or a reliability upgrade.
 
That will work in the Talion just fine, i also know Mamba Monster 2 ESC and their 2200kv motors work well, HPI's ESC and Motor for the Vorza Flux work fine as well (they are rebranded Mamba Monster 2's)

I was going with the castle but
Man programming is a pain in the (behind) for me
And i don't like complicated staff
Like hobbywing it comes with the program card
Goes something like

Click1 adjust
Click2 adjust
Click3 adjust
Click4 adjust

Simple :D
 
Okay not sure if I should start a new thread or just ask here because I don't want to take over someone else's thread but what would be the main reason for doing a motor and escape upgrade. Is it for more power or a reliability upgrade.

Its ok to post ask question if its about the same thing
My main reason for me getting this combo

reliability that blx esc have issues on it
I could just get the max8 ezrun esc and use the stock motor
But i figured ill just get the combo and have spare motor for the talion
 
Its ok to post ask question if its about the same thing
My main reason for me getting this combo

reliability that blx ESC have issues on it
I could just get the max8 ezrun ESC and use the stock motor
But i figured ill just get the combo and have spare motor for the talion

Okay thanks ARRMAgeddon! I haven't had any issues with my blx yet but may upgrade sooner just to avoid any issues
 
And then i think i have seen a better motor combo than max8 lol
Its for 1/5 scale i think?
Wonder if i can use that big 1/5 scale esc motor combo
That should really push this talion
 
Okay thanks ARRMAgeddon! I haven't had any issues with my blx yet but may upgrade sooner just to avoid any issues

Oh i should have said some
Not all have issues with the blx
But this talion will be sent to 3rd world country(no spare parts everywhere)
And i don't want to have that problem later on
Want to make sure everything is working flawlesly
 
Would this combo run much cooler than the stock motor combo?
Or would i need to change gearings on the talion to keep it cool
Philippines is very hot around 95 deg
And running on the sand let say about 105?
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top