EXB rear suspension arms Notorious

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Kneesliding

Member
Messages
93
Reaction score
148
Location
Germany
Arrma RC's
  1. Kraton 8S
  2. Notorious
  3. Outcast 8s
Hi

Has anyone else tried to fit the Kraton EXB arms onto a Notorious?

According to the arrma parts list they should fit.
But on my Notorious the arms don't fit past the wings on the rear of the chassis...

Can't adjust the droop screw at all.

20201108_174612.jpg

Am I missing something?

It extra part needed is the longer secure pin for the shock attachment.
 
Hi

Has anyone else tried to fit the Kraton EXB arms onto a Notorious?

According to the arrma parts list they should fit.
But on my Notorious the arms don't fit past the wings on the rear of the chassis...

Can't adjust the droop screw at all.

View attachment 108472
Am I missing something?

It extra part needed is the longer secure pin for the shock attachment.
Unfortunately they are not a fit for your notorious... I don’t know why arrma lists them this way. The exb chassis is also needed.. and as you mentioned the longer shock pins. And if you want the suspension to be how the EXB’s is supposed to be you’d also need the tower and the exb has a slightly longer shock body.
 
Can't be.

The Kraton EXB chassis is the same apart from the material.

And the parts at the back are the same.

I'll look on my kraton in the morning and see....
 
The little ears/lobes on the Kraton EXB are smaller with a 90° angle on the flat side that faces the center of the chassis where the non exb chassis has more of an angle to them. You'll have to grind off some of that little lobe to make clearance.
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top