Felony ESC and motor combo upgrade.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Dp1felony

Active Member
Messages
69
Reaction score
71
Arrma RC's
  1. Felony
Ordered new fans, but till then removed the old original fans from motor and ESC.
Double sided tape in place for now.
New motor and ESC installed, bind and programmed.
All seems to be working ok. Just needs a proper test drive when wether permits.

IMG_20210704_000515.jpg


IMG_20210703_204928.jpg


IMG_20210703_213643.jpg


IMG_20210703_213705.jpg


IMG_20210703_214147.jpg
 
You will find that the 160 drops in, it's made for it. Only issue I had was the switch, used double sided tape for that.
Highly suggest putting some tape on the side of the switch, otherwise that button top will eventually pop off, and it will be gone.
 
^^^^ what he said on the switch.... learned the hard way and later fixed all mine to never have this happen again :cool:
 
You will find that the 160 drops in, it's made for it. Only issue I had was the switch, used double sided tape for that.
Highly suggest putting some tape on the side of the switch, otherwise that button top will eventually pop off, and it will be gone.
Yeah all the holes are already there for it 👌 I managed to fit the switch back in the original position too 👍
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top