Felony Felony / Infraction Hood Scoop - Ram Air System

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

nomis38

Very Active Member
Build Thread Contributor
Messages
1,795
Reaction score
3,236
Location
Tennessee
Arrma RC's
  1. Felony
  2. Infraction
  3. Limitless
  4. Kraton EXB
  5. Mojave
  6. Outcast EXB
  7. Senton 6s
  8. Vendetta
Well I have had a lot of PM's / Interest in my custom made hood scoop. Figured I would make a separate post on it at this point. I have made a new revision as well on the lower half. And yes it works so well you really don't need fans lolol, not saying you should rip your fans off, but its that good, pictures don't do it justice, it's huge and creates a ton of air flow!!

I'm sure this is doable on an infraction but as I don't have one I cannot map it out for you.

1. First cut a hole in your body like so... Don't put the 4 screw holes in yet.
325609356_884344869564623_5384639347926043893_n.jpg
325458881_5838884132857942_7452594990335249410_n.jpg


2. Now print the upper and lower intake, free on my thingiverse, https://www.thingiverse.com/kuskye25/designs

3. Once thats done use either the upper or lower intake as a template to make your 4 holes in the body.

4. Now assemble, the holes are made for M3 screws.

5. Enjoy your amazingly and potent new cooling system lol. Flames are optional but available for download as well!!! You will need to heat the flames once done and make a bend in them before gluing them on them.

325887392_689024082771168_7923751002874278228_n.jpg
326100857_904039007273971_6798192248287355563_n.jpg
326251695_719730046325552_1597594861853137441_n.jpg
325963110_1728607964202065_8106014284196976275_n.jpg



 
Last edited:
I have the occasional youtube vid that breaks 1k after a week or two, but its rare lol, couple old ones that broke 20k views lol... My heli builds seem to be the best as of late.

Update to this thread everyones intakes have shipped. Enjoy Fellas. I gave an extra upper to everyone as well cause if you flip its done. Thanks for everyones support. Its my hobby so if it flops I will still continue to do it anyway cause I think 3d printing and youtube vids are fun.... Lmao!!
 
Last edited:
I have the occasional youtube vid that breaks 1k after a week or two, but its rare lol, couple old ones that broke 20k views lol... My heli builds seem to be the best as of late.

Update to this thread everyones intakes have shipped. Enjoy Fellas. I gave an extra upper to everyone as well cause if you flip its done. Thanks for everyones support. Its my hobby so if it flops I will still continue to do it anyway cause I think 3d printing and youtube vids are fun.... Lmao!!
Hey i have to give a shout out to the absolute genius behind this. i did wreck, but while heavily geared i was running the stock fan on the motor and esc. i have to tell you this makes it possible over 100mph to not only keep the motor and esc cooled, they just didnt heat up. ran back to back trying to see how hot i can make it and the car wouldnt get hot. definantly buying a new felony and Mr. Nomis38, i will need another lower intake. you might need to keep my card on file sir. Thanks so much for the fun experience that didnt have to stop after 6 mins due to heat. This was badass!
 
Hey i have to give a shout out to the absolute genius behind this. i did wreck, but while heavily geared i was running the stock fan on the motor and esc. i have to tell you this makes it possible over 100mph to not only keep the motor and esc cooled, they just didnt heat up. ran back to back trying to see how hot i can make it and the car wouldnt get hot. definantly buying a new felony and Mr. Nomis38, i will need another lower intake. you might need to keep my card on file sir. Thanks so much for the fun experience that didnt have to stop after 6 mins due to heat. This was badass!
Sorry to hear about the crash!!! Glad you love the active air intake!! My felony has changed a bit in the time since. I am now designing this to fit basically any windscreen universally. I am making it for my bitty design Lambo body, but it will work on almost anything via adapter plates and double sided foam strips.

Updates to my felony:

 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top