Kraton Finally ready!!!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Cereal_killer

Bash/Break/Fix/REPEAT 🤣
Premium Member
Hospitality Award
Build Thread Contributor
Messages
4,258
Reaction score
8,748
Location
Missouri/Illinois
Arrma RC's
  1. Limitless
  2. Kraton 6s
Hr mount installed. Downside. 22 or 23 pinion max! Ordering pps mount... the 1250kv was too heavy for the factory mount.. hopefully quits eating through spurs! Diff covers finally on! Along with many other things that are done finally. Can't wait to at least get a run!

20210713_205255.jpg


20210713_205307.jpg


20210713_205326.jpg


20210713_205332.jpg


20210713_205340.jpg


20210713_205354.jpg
 
Nice I just got one them fans u got on ur esc. I am trying to put on my motor. But it hits the body. So I got fiuger out new way to mount it. And with a 2 or 3s battery it moves some air. And you will love the PPS mount. 👊 Nice rig
 
I think 22-23 is about all the stock v4 mount will take too. You can drop to a 46t spur and fit a taller pinion as well.
 
I think 22-23 is about all the stock v4 mount will take too. You can drop to a 46t spur and fit a taller pinion as well.
I have the v5. With one screw. I could go up to 30t. But it was eating the pinions because it wasn't aline right.. but 25t was the max with two screws. Plus I'm running the 8s system. Pps will take care of it. Just temporary
 
I have the v5. With one screw. I could go up to 30t. But it was eating the pinions because it wasn't aline right.. but 25t was the max with two screws. Plus I'm running the 8s system. Pps will take care of it. Just temporary
I run 24/46 on the stock v4 mount which should be just like the v5 and there is room to go up from there. My 8s dual battery stretched mojave uses an ebay special that as the mount slides out it angles up. i am running 38/50 on it :ROFLMAO:
 
I run 24/46 on the stock v4 mount which should be just like the v5 and there is room to go up from there. My 8s dual battery stretched mojave uses an ebay special that as the mount slides out it angles up. i am running 38/50 on it :ROFLMAO:
Jeez 38/50!!! Wouldn’t it be easier to find a smaller spur 🤣🤣🤘🏻🤘🏻
 

Attachments

  • 081DB112-1EEC-4D10-A2BC-39BE5F79EDFB.jpeg
    081DB112-1EEC-4D10-A2BC-39BE5F79EDFB.jpeg
    316 KB · Views: 42
  • 785AA725-46B9-4675-994B-2AFD9E9EC2D4.jpeg
    785AA725-46B9-4675-994B-2AFD9E9EC2D4.jpeg
    329.3 KB · Views: 49
  • E3B2D6F4-8A73-45C4-8D98-DBC2EBE6735A.jpeg
    E3B2D6F4-8A73-45C4-8D98-DBC2EBE6735A.jpeg
    375.5 KB · Views: 42
Hr mount installed. Downside. 22 or 23 pinion max! Ordering pps mount... the 1250kv was too heavy for the factory mount.. hopefully quits eating through spurs! Diff covers finally on! Along with many other things that are done finally. Can't wait to at least get a run!

View attachment 157890

View attachment 157891

View attachment 157892

View attachment 157893

View attachment 157894

View attachment 157895
what tires are those?
Hr mount installed. Downside. 22 or 23 pinion max! Ordering pps mount... the 1250kv was too heavy for the factory mount.. hopefully quits eating through spurs! Diff covers finally on! Along with many other things that are done finally. Can't wait to at least get a run!

View attachment 157890

View attachment 157891

View attachment 157892

View attachment 157893

View attachment 157894

View attachment 157895
what tires?
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top