Infraction Firma 160 on 2050kv?

[jkflow]

The 4mm will melt off with the Firma160 if you are pushing it hard, for me that happened with normal street bashing.

 

[AIan]

Oh wow, even on 6s?

 

[jkflow]

Yes, on 6S

 

[Enferius]

Yeah I'd rather just have 6.5mm bullets all the way through. The stock bullets can't handle the power draw of the ESC. That much I know. My only concern is making the motor wires even smaller. I'll have to cut the shrink wrap off and see what I can do.

 

[jkflow]

Don't cut anything, desolder the 4mm bullets and replace with 6.5mm. Don't be tempted to cut anything on the motor side.

 

[TheBadazz]

Or just make an adapter from the size bullets on your motor now (4mm) to the male bullets to go into the esc (6.5mm?) like the post from “Thebadazz”View attachment 165576

I'm going to eventually get a 4082 1720kv surpass motor or 4585 1580kv in it. So I can gear it up a little anyway. They're both 6.5mm

 

[SrC]

Don't cut anything, desolder the 4mm bullets and replace with 6.5mm. Don't be tempted to cut anything on the motor side.

^^^ What I would do also.