First time paint job it was fun

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

katydon

Active Member
Messages
30
Reaction score
113
Location
Katy,TX
Arrma RC's
  1. Granite
  2. Typhon 3s
  3. Vorteks
I upgraded the rear diff with the arrma metal ring & pinion really nice and way cheaper then Hot Racing the diff housing comes with 16mm long screws but they were to long and bottomed out so installed 12mm and worked great

20220630_150150 (1).jpg


20220630_150234.jpg


20220911_190450.jpg


20220911_190433.jpg
 
Awesome color choice. Choice upgrades too. 👍
What yoke did you use for the new diff?
 
And Go Get Yourself Some Cheap Sunglasses 🕶👍
 
Awesome color choice. Choice upgrades too. 👍
What yoke did you use for the new diff?
I retained the stock ARAC4059 but there is a small tab on the inside close to the pinion and needed to remove it as it interfered with the metal pinion maybe it is a tad larger OD I didn't check the measurements
 
I retained the stock ARAC4059 but there is a small tab on the inside close to the pinion and needed to remove it as it interfered with the metal pinion maybe it is a tad larger OD I didn't check the measurements
You shouldn't have to modify the yoke at all. I was gonna suggest using the Hot Racing yoke at the rear. I at through a set of gears using the composite version on my 4s Kraton.

20220420_160126.jpg


20220420_160055.jpg
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top