Fixed my none centering steering issue

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Cater4anytink

Active Member
Messages
117
Reaction score
42
Location
Birmingham uk
Arrma RC's
I've finally fixed my wheels not returning to center problem. I found a you tube video by kasper becker.
I spent so much time trying to find the cause like taking my servo apart and ordering a new one, ajusting servo saver,and loosening quiet a lot of the front end. Turns out if you remove wheels you have two red knuckles if you loosen them it fixes the problem. How did we get by before internet with the many great forums and youtube. Here's the link.
 
Last edited:
I would suggest you spray some dry lube and or Powdered graphite behind those Red kuckles. And then I thnk the rule of thumb is to tighten them snug, and back off 1/4 turn. you don't want the Hub assembly to have any play in it, but you also don't want to bind the ball joint.
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top