Kraton Found a small issue on my Kraton EXB/ Check yours!

[dk3000]

Hey guys after breaking my left rear shock rod end I noticed that one side(right) had some play/wiggle in the dog bones to the end rods. The left side was basically pinned against the shock tower with zero movement. Obviously they are supposed to have play on both sides since there on pivot balls.
Simple fix was to disconnect at the shock tower side and turn the turnbuckle the correct way. Easy fix. Check your exb's and share your thoughts to a noob like me??

 

[JvG]

My Kraton also has this after every bash. I just turn the turnbuckle back a tiny bit with a small wrench.

 

[Crewchief227]

A) Not a dogbone
B) They're rear camber links and adjusting them only effects roll center & rear camber

 

[dk3000]

A) Not a dogbone
B) They're rear camber links and adjusting them only effects roll center & rear camber

10-4 on those dogbones lol. Good to know. I'm still thinking it was an issue needing fix as it had no play and clearly is designed to have some. Still learning, thanks

 

[Jimbobjr]

Sometimes the chamber links will mysteriously self adjust. It was a mystery to me until someone pointed out that the ends can get jammed in on hard impacts without unscrewing.