- Messages
- 2,354
- Reaction score
- 3,182
- Arrma RC's
- Kraton 6s
- Notorious
what would cause what looks like lightening bolts to go across the screen in my fpv goggles? I have the cam wired to a 5v bec/power hub in my kraton and noto and when I accelerate and brake etc it shows what I can only describe as mini lightening bolts and static going across the goggle's screen. Do I need to solder in a cap somewhere, and where would that be. The way I have it wired is a harness that I made to split the battery lead to run into the esc and to the bec/power hub then the cam is wired direct to the 5v "cam" lead on the bec/power hub. I needed to use a bec/power hub because the eachine cams I'm using are rated for 3.6-5.5v max so the receiver would put out too much power to wire the cam to that instead of the bec/power hub. If I need a cap what size and where should I install it.