Frankenstein build

Is this suitable to be on the arrma forums build page?


  • Total voters
    11
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

3d-rc.myshopify.com

Eat,sleep and breath Arrma
Lifetime Premium!
Premium Member
Excellence Award
Hospitality Award
Build Thread Contributor
Messages
6,197
Reaction score
11,368
Location
Michigan
Arrma RC's
  1. BigRock 4x4
  2. Granite
  3. Infraction
  4. Kraton 8S
  5. Kraton 6s
  6. Notorious
  7. Senton 6s
  8. Senton 3s
Ok plan is I have a nitro buggy 1/8 scale.
I am compiling a parts list from arrma parts to convert it to a arrma warrior.
Must installed parts I am going to fit in.
Blx185 esc
Blx 2050kv
All 3 diffs from arrma products
Chassis braces

Please take the time to vote at top of the page. Thank you
 
Last edited:
This will be the donor chassis
 

Attachments

  • 20191026_112506.jpg
    20191026_112506.jpg
    299.8 KB · Views: 54
  • 20191026_112514.jpg
    20191026_112514.jpg
    356.3 KB · Views: 59
  • 20191026_112619.jpg
    20191026_112619.jpg
    274.1 KB · Views: 46
  • 20191026_112552.jpg
    20191026_112552.jpg
    337.8 KB · Views: 42
  • 20191026_112649.jpg
    20191026_112649.jpg
    358.7 KB · Views: 43
Just into it and hit first issue. The arrma center diff is too dam big for this little car lol. Resolution. Dremel out 6 arrma shock disk and use them as spacers. I refuse to use misc parts if I can make arrma parts work. Fingers crossed
 

Attachments

  • 1575503533547402131462951476689.jpg
    1575503533547402131462951476689.jpg
    201.6 KB · Views: 37
  • 15755035574573261267205580747546.jpg
    15755035574573261267205580747546.jpg
    182.4 KB · Views: 33
Update
Diffs, electronics and conversion done. Need to head to lhs to see what else arrma will fit
 

Attachments

  • 15755075330534712172430976089880.jpg
    15755075330534712172430976089880.jpg
    445.9 KB · Views: 53
  • 15755105555923431195206818851867.jpg
    15755105555923431195206818851867.jpg
    428.1 KB · Views: 45
She is bn ripping. Just ran 6s on her. My gps is dead so can't get a mph but faster then 50 mph easily. I speed ran her till lvc and she was barely warm. I have a 17 tooth on her. She wont fit any bigger so I am going to drop to a 45 spur and hope I can squeeze a 19 pinion in her.
 
I ran her a couple days ago on lunch. Killed what was left of the tires in 1 battery. GPS said 59.9mph tires spinning most the way to it. That was on a 16 t pinion and she barely got warm.. gonna order a 23 tooth and she how that works. Goal is 100mph
 
good luck with that reaching 100mph...

Besides the above, buggy electric conversion looks clean.

If you like that kind of stuff, here is a good site. I converted a Sportwerks Turmoil to brushless, 4S and it rips, more than enough with a 19T, anything faster and any little bump and its airborne.

https://www.rc-monster.com/
 
I ran her today on 20 t pinion and she hit 87.6 mph I have a 45t spur that will be here tomorrow and a 23t pinion just incase that doesn't do the trick lol. It barely got warm thanks to it being 40°f today. She is going to hit the 100mph mark but she might only get 1 run before the blx gives out on me. I will check that out right now.
 
This is after today's run. She hasn't been cleaned yet. The 45 tooth spur was in the mail today. So that is going to happen first to see where she is at
Screenshot_20191208-183101_Samsung Internet.jpg

Just did the math. I'm pretty much on par given the lost from weight and wind.
Definitely helps its only 4.5 pounds with battery
 

Attachments

  • 15758474427737844917479982184755.jpg
    15758474427737844917479982184755.jpg
    502.3 KB · Views: 37
  • 15758474868485253293589435291343.jpg
    15758474868485253293589435291343.jpg
    548.2 KB · Views: 36
  • 15758475190754306088703827988680.jpg
    15758475190754306088703827988680.jpg
    447.1 KB · Views: 39
  • 15758479784753055332938057575447.jpg
    15758479784753055332938057575447.jpg
    451.8 KB · Views: 38
Last edited:
Back
Top