Notorious Front chassis bent

[Jfoster3685]

So I’ve been bashing my Notorious and had the chassis bend in a medium sized jump to gravel. It bent right behind the set of 4 screws in the front between the a arms. I’ll post pics tonight! Anyone else have any bends that seemed to happen easily? This is my second Notorious (first one was stolen in Chino Hills, Ca...) maybe I was lucky with my first Notorious not
Bending so easily.

 

[Mr.Duke]

There's supposed to be a slight bend where you're describing.
If this is what you're seeing, it's all good

 

[Jfoster3685]

There's supposed to be a slight bend where you're describing.
If this is what you're seeing, it's all good
View attachment 47871

Oh wow! Thanks! Mr.duke. I made a custom lexan glass skid when I noticed it...

 

[olds97_lss]

I just replaced my chassis with the m2c chassis. My outcast no longer had that front kick up, it's flat. My rear was bent down. I had flattened the rear of stock chassis a few times and decided it was time to change it out. The T2T brace I had made didn't fit with the new chassis. I had to grind out the channels as now with the chassis bent properly my towers are 3-4mm closer together at the top.