Outcast Front diff output wear

[98jdmcivic]

Read a lot about dog bones popping out due to wear, A arms flexing, pillow balls backing out, etc...

I have thread taped the pillow balls and their cap screws, which worked well.

For some reason my front right keeps popping out on moderate air landings and/

or crashes. My question is, does the diff output pictured here need to be replaced?

 

[Mr.Duke]

Yes, the problem will continue to get worse until you pull the front diff and replace that cup

 

[98jdmcivic]

Yes, the problem will continue to get worse until you pull the front diff and replace that cup

Thats what I suspected...just wasnt sure. Thank you for the quick reply.

I will order one online to have one in while I tear this one down. Just getting into the hobby rc world. Seems like I am building up quite the bench stock!

 

[Mr.Duke]

It's Arrma Part# AR310439 and usually goes for about $12 a pair.

https://www.towerhobbies.com/cgi-bi...MI7Yie9rTv4gIVRESGCh1KpQmGEAQYASABEgIXyPD_BwE

If you're in the states buying a whole diff from a kit breaker like jennyrc will save you money in the long run. You can get an entire diff for about $32. They go in and out of stock so check daily and you can get anything you need when it comes back in stock.

https://jennysrc.com/search?type=product&q=Arrma

 

[98jdmcivic]

It's Arrma Part# AR310439 and usually goes for about $12 a pair.

https://www.towerhobbies.com/cgi-bi...MI7Yie9rTv4gIVRESGCh1KpQmGEAQYASABEgIXyPD_BwE

If you're in the states buying a whole diff from a kit breaker like jennyrc will save you money in the long run. You can get an entire diff for about $32. They go in and out of stock so check daily and you can get anything you need when it comes back in stock.

https://jennysrc.com/search?type=product&q=Arrma

Great information, thanks!