- Thread starter
- #21
Those are shims for the internal diff gears which are also a must as there was huge play in the diff outdrives....(mind you newer v2 editions may have solved this)
The shims i used on the bearings to stop the entire diff moving are these https://www.modelsport.co.uk/hpi-shim-13x16x0.2mm-10pcs-/rc-car-products/32237
forget about shimming the pinion gear, you take the diff out and pop these hpi shims on the bearings on the diff itself...take a bit of time, trial and error to find out what runs smooth and stops the diff moving from side to side...its this movement that is eating your diffs.
That's what I was planning to do not shim the pinion must if typed the wrong thing but everything is ordered along with a new set of outdrives from team Durango so next week should be back up and running