Senton Front Left Wheel Issues

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Speesy-8386

Fairly New Member
Messages
1
Reaction score
0
Arrma RC's
  1. Senton 6s
Hello all,

I have a Senton 6S BLX and when the front left wheel is tight enough that it will stay on it won't spin. Well, it will with enough force, but it's not right. Any idea what can be causing this?

Thanks!
 
Hello all,

I have a Senton 6S BLX and when the front left wheel is tight enough that it will stay on it won't spin. Well, it will with enough force, but it's not right. Any idea what can be causing this?

Thanks!
Most likely a bad bearing. Probably that or you’re missing the hub pin.
 
Could be debris behind your wheel wrap all around between the hub and the hex. Does the hex spin free with the wheel off? I’d start there and work your way in. Hope it’s just a little fishing line wrapped in there and nothing that will hold up the fun for too long.
 
Could be debris behind your wheel wrap all around between the hub and the hex. Does the hex spin free with the wheel off? I’d start there and work your way in. Hope it’s just a little fishing line wrapped in there and nothing that will hold up the fun for too long.
That’s a good call. I had someone’s weave wrapped up in a hub once. It must have been laying around in the parking lot I was running on. Never saw it. Another good reason to walk your space before running your rig.
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top