- Messages
- 1,154
- Reaction score
- 1,084
- Arrma RC's
I used the old bushings from the Bell Crank, and put them in the back. 1 on each side of course. I am not sure how thick they are, but the Caster is good, with a slight toe in.
Outcast Front Suspension spacers
- Thread starter robl45
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
These spacers are to adjust the Caster, which effects how the cars responds to steering. Moving the arm forward and back will slow or speed up the steering response. In theory. For bashing, it probably does not matter.
I used washers as a replacement for a while, but they are really a PITA getting them in there after maintenance. I bought the caster clip set for Mugen, for $6. Comes with a bunch of clips, in 2mm, 1mm, and 0.5mm thickness.
http://www3.towerhobbies.com/cgi-bin/wti0001p?&W=003058064&I=LXDPSD&P=K
I used washers as a replacement for a while, but they are really a PITA getting them in there after maintenance. I bought the caster clip set for Mugen, for $6. Comes with a bunch of clips, in 2mm, 1mm, and 0.5mm thickness.
http://www3.towerhobbies.com/cgi-bin/wti0001p?&W=003058064&I=LXDPSD&P=K
