SOLD / FOUND Going back to stock sale!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Status
Not open for further replies.

yodazoo976

Active Member
Messages
32
Reaction score
26
Arrma RC's
  1. Fury
Looking to get $35 for all the conversion pieces. and $20 for the tacon

This worked well for me but I put the truck back to stock for now. These are hpi blitz rear hub carriers massaged into arrma fury arms.

Carriers had material taken from one side so you can either run with a slightly shorter wheelbase or slightly longer wheelbase. wheels still fit under the stock body.

The hpi hubs offer more agressive roll center/ camber gain adjustments. Also the Hpi carriers use a more standard (5x10x4) bearing.

Including 1 extra hpi axle and 2 sets of hpi dog bones. 1 set for using shock limiters in rear, one set for full length shocks.

B46A9490-46C8-4134-B626-07037FDAFE28_zpshglxxuwc.jpg


7CC0ECEA-0583-49FE-8A16-2D23FD740544_zpsrcunbouy.jpg


259b533b-4286-4e6b-a280-dcb4b94b7a2f_zpshv4wclxn.jpg


Traxxas slipper setup with 3 spur gears. 32p or .8 mod pitch gears.
50, 54, and 58t spur gears.

2B1799DA-2899-44A2-B7F3-5AC900B6FB2D_zps0jhzzazp.jpg


Front sway bar attaches to front bumper. You would need to drill your front control arms to attach:

BACDAC7C-793E-4A66-8F3C-28350B48FFB9_zps7347iunv.jpg


Tacon 4800KV Brushless Motor.
7F25331B-FB5E-490E-B35A-4ED9BFAE2C6F_zps3dyzyhlw.jpg


EF3BC4C5-622B-4A7C-80F6-89953A34CEA7_zpscatafj7h.jpg


A7EBD8BD-AF74-42A7-9E19-9AA0641BF605_zpsgbloayea.jpg
 
Hi

If you don't mind me asking why are you selling.
 
Im selling the truck locally. It was fun trying to make something different fast around a track, but the steering bellcranks keep breakingon me so I bought different trucks.
 
have the same issue. i end up selling the roller locally and bought typhon and talion. GLWS!
 
Status
Not open for further replies.
Back
Top