Kraton GPM Hardened Steel ARRMA Kraton Rear CVD

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

marlin1856

Member
Messages
31
Reaction score
25
Arrma RC's
So I lost one rear dogbone from my M2C V3 Kraton in a nasty crash and was wondering if anyone has any experience or comments about the GPM Hardened Steel CVD so called upgrade? at least this way I would never lose another rear drive shaft.
 
Stay away, that’s my advice.
I broke 3 simultaneously (what are the odds). This was on a K8 but I doubt their QC would be any different on the 6S.
 
Stay away, that’s my advice.
I broke 3 simultaneously (what are the odds). This was on a K8 but I doubt their QC would be any different on the 6S.
Thanks for the heads up looks like a pair of stockies it is then, at least Ill have 1 x left as a spare (y)
 
Thanks for the heads up looks like a pair of stockies it is then, at least Ill have 1 x left as a spare (y)
You can use the stock front cvds in the rear. No more lost dog bones👍🏻👍🏻
 
Set your droop properly and shim out any extra play in the hub.

Your droop should be set so that you have to compress your shocks just a bit to get the pin in.
Yep have done all that but my problem was a snapped bulkhead and bent himge pin causing the rear arm to swing freeee and wha La...lost dogbone😢
 
Back
Top