Granite Granite 550 Mega - leaning rear end

[RBuchetto]

Ran a search and viewed several of the tutorial videos, but can’t seem to figure this out. I apologize first if this has already been answered!

The rear end of my Granite seems to be leaning at the control arm. It doesn’t seem to be related to the shims of the shocks, but maybe I have to play with the various shims they came with the car. The lean has appeared to gradually occur after three runs of hard turns and one spin-out flip so maybe the rear left shock is already starting to wear out?

The manuals that came with the R/C are terribly useless (and was fortune to find a video here on how to bind my controller first time I used the R/C. Hoping someone has a few ideas before I just start pulling the thing apart as I prefer to learn before I take it to the hobby shop to get looked at!

 

[grihn]

This happened to me once. It was debris caught in the lower control arm preventing it from achieving full droop. May not be your issue, but it's worth a quick check.

 

[Senton_Prime]

Idk but something is up with that left strut for sure!!