Granite radio range very short

[Irik dupar]

My granite wont operate unless im walking with it the furthest it'll go is 5ft then it'll just stop I have to walk up to it in order for it move again what can be the problem

 

[WoodiE]

@Irik dupar make sure the batteries in your Arrma Granite and transmitter are fully charged and try again. If that doesn't help then you might want to try re-binding the transmitter and receiver and if that doesn't help either then contact support.

 

[Irik dupar]

@Irik dupar make sure the batteries in your Arrma Granite and transmitter are fully charged and try again. If that doesn't help then you might want to try re-binding the transmitter and receiver and if that doesn't help either then contact support.

How do I rebind my transmitter to the receiver

 

[WoodiE]

How do I rebind my transmitter to the receiver

How to bind your Arrma Granite receiver and transmitter

1. Press and hold bind button on receiver.
2. Turn on your Arrma Granite.
3. Receiver LED will start to blink, indicating the receiver is in bind mode.
4. Turn on your transmitter, wait a few seconds.
5. The LED on your receiver will stop blinking and binding should be complete.

Turn everything off and back on again then check range.

 

[Irik dupar]

How to bind your Arrma Granite receiver and transmitter

View attachment 9982

1. Press and hold bind button on receiver.
2. Turn on your Arrma Granite.
3. Receiver LED will start to blink, indicating the receiver is in bind mode.
4. Turn on your transmitter, wait a few seconds.
5. The LED on your receiver will stop blinking and binding should be complete.

Turn everything off and back on again then check range.

Ok thank u an should I take off my black receiver box?

 

[WoodiE]

@Irik dupar you'll have to remove the receiver box lid, but that should be all.

 

[Irik dupar]

@Irik dupar you'll have to remove the receiver box lid, but that should be all.

Ok thank u buddy