tigerljj1
Active Member
So per my other post, decided to grease spur gear only (not pinion). Used coffee wooden stick (worked perfect), Q-tip, and Phil Wood waterproof grease.
Cracked stick in half and left me with sharp edge to easily get in between teeth. Applied very carefully not to glob it in. After entire spur was grease, I rotated pionion-spur to get as much on pinion. I then wiped excess from spur with Q-tip which was very little. Man what a difference.
Cracked stick in half and left me with sharp edge to easily get in between teeth. Applied very carefully not to glob it in. After entire spur was grease, I rotated pionion-spur to get as much on pinion. I then wiped excess from spur with Q-tip which was very little. Man what a difference.