Notorious Grimbles' Notorious Build Thread

[Grimbles]

Build thread for my beast of a noto! I bought a roller based on a v3 platform, with these upgrades: m2c chassis, voltage hobbies towers and braces, hr servo saver, proline trencher 3.8s. Ran it on a hobbywing max 8 combo and realised the diffs were also shot.

So now it has:

1) all metal diffs (gpm diff cases front and rear, arrma centre)
2) m2c skid plates (and a chassis sticker lol);
3) fastrax servo mount;
4) new rear wing and mount, m2c wing nuts (because pretty);
5) new receiver box;
6) exb motor mount (swapped from moj which is all pps), Robinson racing diff mount (prefer pps, the RR one is very sharp);
7) new noto centre brace;
8) exb front top plate;
9) scorched parts mud guards;
10) electronics - mamba monster x, tp 4250 2100kv (bit quick maybe so pinioned down to 18 for now), jx 36kg servo, flysky bs4/it4s;
11) yeah racing motor cooler w/thermal pads, 1x40mm fan on a @suchtragedy designed 30-40mm adaptor.

Norma the Noto is a UNIT!

 

[Grimbles]

Still to come: m2c towers and standoffs, sensor cable (didn't have one long enough lol).

 

[FatCatRC]

looks good!

 

[Grimbles]

looks good!

Thanks chap! I will wrap and shrink all the wires like I did on my moj over the weekend. Neaten it up a bit, but pretty happy

 

[FatCatRC]

Thanks chap! I will wrap and shrink all the wires like I did on my moj over the weekend. Neaten it up a bit, but pretty happy

Those wire wraps are a pita but they sure do make the rigg look clean when you are done. I have my jx 36kg on the way for my kraton. I need to stiffin up both my savers though they both have sloppy turning atm.

 

[Grimbles]

Those wire wraps are a pita but they sure do make the rigg look clean when you are done. I have my jx 36kg on the way for my kraton. I need to stiffin up both my savers though they both have sloppy turning atm.

I've got a 46kg which needs 12v (and a bec for it) which may end up in this noto. Even with that 36kg, there is a fair wobble at pace! Those trenchers are heavy!

 

[secretninja]

wow!! very nice build, almost too nice to run, almost...lol

 

[Grimbles]

wow!! very nice build, almost too nice to run, almost...lol

Thanks chap! Can't wait to run her next w/e

 

[Cheez]

Lks lik fun

 

[sanara.kenshin]

Nice build! Ive been wanting a Noto for a while. Im thingking of converting my truggified typhon to a full noto or mini noto with mojave arms and backflip lp tires.

 

[TypeR]

Which chassis is that? Is there a 7075 for the noto chassis. Never heard off

 

[Grimbles]

Which chassis is that? Is there a 7075 for the noto chassis. Never heard off

https://m2cracing.net/arrma/59-m2c3005-arrma-goliath-outcasttyphonsentnotor-6s-blx-.html

 

[TypeR]

https://m2cracing.net/arrma/59-m2c3005-arrma-goliath-outcasttyphonsentnotor-6s-blx-.html

Thanks!!! I forgot that the outcast was the same chassis

 

[Grimbles]

Have done a bit of work on Norma the Noto this weekend! M2c towers, rear braces and shock stand offs, "46kg" servo, roll hoop, some stickers and some self assembled, duct tape belted badlands 3.8s. The oversized trenchers were just comical cookie cutters and I had little control. Let's see how these bad boys do!

 

[Grimbles]

M2c hinge pins finally arrived!

 

[TriggerHappy]

Time to sendit to the moon

 

[Grimbles]

Time to sendit to the moon

To the moooooooooon!

 

[jondilly1974]

To the moooooooooon!

.

 

[TriggerHappy]

Nice build!

 

[Jordan10R]

I wouldn't go with gpm diff case. Poor design. You have to do a little bit of work to get the diffs out. It's not just the 4 screws like normal. I have them on my noto. And wish I would just went with HR. But she looks tuff man. Nice build.

I got take rear diff apart tonight. I will send pics of what I am talking about when I tear it apart