Kraton Heatsink fan plug into receiver B?

[Dauransx]

I got a HW Motor heatsink+fan. what do i plug it into on the receiver? B?

 

[JvG]

Add a splitter on the ESC output for the ESC fan, wrap it in heat shrink tube for water and dirt protection, connect both fans to it and you are good to go!

20170622_234914

• JvG
• Jun 22, 2017
• 1

Esc cover

20170622_234925

• JvG
• Jun 22, 2017
• 2

Hobbywing heatsink with thermal pad

 

[Dauransx]

Add a splitter on the ESC output for the ESC fan, wrap it in heat shrink tube for water and dirt protection, connect both fans to it and you are good to go!

20170622_234914

• JvG
• Jun 22, 2017
• 1

Esc cover

20170622_234925

• JvG
• Jun 22, 2017
• 2

Hobbywing heatsink with thermal pad

I really don't have that option right now. i'd rather plug it into the receiver right now for now but i don't know if it plugs into the B slot or Ch3

 

[jrwalte]

You can plug it in channel 3. Just make sure you are on the pos and neg pin and not the signal.

 

[Iamtheoutcast]

I put my fan in channel b servo in 1 and esc in 2 that is how it works in my kraton. Ch3 is for accessries light bars, rear steer, and adjusting your steering end points you use the ch3 up and downs.

 

[nulli]

Ch1 is servo & ch2 is ESC. Everything else can be plugged into any available port.